Yes. Hello 2023 - Women's Snowboard
2023 Yes. Hello Snowboard
The Hello was built in response to a growing demand for a true resort board. Using the same outline as the Hel YES. This model shares the edge hold and carving ability of UnderBite to deliver performance on the groomers, side-hits and in the park. The directional twin shape allows it board to float shamelessly through powder and chatter, making it a true quiver-killer.
Camber Profile
Directional CamRock 2-3-2 – Rocker in the tip and tail, camber underfoot.
Flex
6/10
Shape
UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.
Core
Full Poplar – Yes.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.
Laminates
Biaxial Glass
Base
Sintered Spec – This is the term we use and is the grey zone many companies play in. We call it Sintered Spec because it’s hardness and chemical properties are very close to true sintered and it’s on-snow performance is also very close to true sintered - but it’s formed using the extrusion process. How? – Well the raw material is actually pre- consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.
Binding Compatibility
2 x 4 Insert Pack
Board Size Chart
| Size (cm) | 146 | 149 | 152 |
|---|---|---|---|
| Effective Edge (mm) | 1110 | 1130 | 1150 |
| Tip Width (mm) | 282.5 | 284.8 | 285.7 |
| Waist Width (mm) | 239 | 241 | 242 |
| Tail Width (mm) | 282.5 | 284.8 | 285.7 |
| Sidecut Radius (m) | 6.7 | 6.9 | 7.1 |
| Stance Setback (in) | 10 | 10 | 10 |
| Stance Range (in) | 17.9 - 21.1 | 18.4 - 21.6 | 19.4 - 22.6 |
| Rider Weight (lbs) | 110 - 140 | 110 - 150 | 120 - 160 |
Original: $349.97
-65%$349.97
$122.49Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
2023 Yes. Hello Snowboard
The Hello was built in response to a growing demand for a true resort board. Using the same outline as the Hel YES. This model shares the edge hold and carving ability of UnderBite to deliver performance on the groomers, side-hits and in the park. The directional twin shape allows it board to float shamelessly through powder and chatter, making it a true quiver-killer.
Camber Profile
Directional CamRock 2-3-2 – Rocker in the tip and tail, camber underfoot.
Flex
6/10
Shape
UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.
Core
Full Poplar – Yes.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.
Laminates
Biaxial Glass
Base
Sintered Spec – This is the term we use and is the grey zone many companies play in. We call it Sintered Spec because it’s hardness and chemical properties are very close to true sintered and it’s on-snow performance is also very close to true sintered - but it’s formed using the extrusion process. How? – Well the raw material is actually pre- consumer recycled (meaning it never left the factory) sintered base material. So while the heating and extrusion process has softened it slightly, it’s still much harder than true Extruded.
Binding Compatibility
2 x 4 Insert Pack
Board Size Chart
| Size (cm) | 146 | 149 | 152 |
|---|---|---|---|
| Effective Edge (mm) | 1110 | 1130 | 1150 |
| Tip Width (mm) | 282.5 | 284.8 | 285.7 |
| Waist Width (mm) | 239 | 241 | 242 |
| Tail Width (mm) | 282.5 | 284.8 | 285.7 |
| Sidecut Radius (m) | 6.7 | 6.9 | 7.1 |
| Stance Setback (in) | 10 | 10 | 10 |
| Stance Range (in) | 17.9 - 21.1 | 18.4 - 21.6 | 19.4 - 22.6 |
| Rider Weight (lbs) | 110 - 140 | 110 - 150 | 120 - 160 |
